SALCO ULTRA-1000 SYSTEM ACCESSORIES

LTU-32 Line Terminating Unit   Thirty-two zone protective loop Line Terminating Unit. Loops are terminated on screw terminals located in each unit. Each zone input is protected by an EMI suppressor network for reliability. Comes with its own metal enclosure and CPU interface cable. 
SC-232 Printer Control Module   Provides an RS-232 interface for communication with a printer, CRT , or PC. Incorporates a clock to enable real time clock controlled options. 

 
SL-1 Remote Status Module

 		   Used to remote the Status, Arm, and Violation LED's and the piezo. 
WY-30 CRT Terminal   For ON-LINE monitoring of events and system keypad commands from the WY-30 keyboard. Also used to configure the ULTRA-1000 operating features during initial system programming. 
HS-11P Outdoor Speaker   Outdoor siren speaker with a power handling capacity of 15 watts and an impedance of 8 Ohms. 
HS-11S Outdoor Siren Speaker   Self-contained outdoor siren eliminates the need for an additional siren box.
 

 

LT-1000 Remote Terminal

Can be interfaced with the ULTRA-1000 CPU or the SR-768. Simple to operate, depress the LED switch momentarily and a zone is bypassed. To remove the bypass depress the LED switch again.

 

 
  GD-1000 Custom Graphic Display Control Panel

 See and control  the real-time status of all monitored doors in your facility, simultaneously at a glance, in one location.   An exact camera ready print of the installation layout must be submitted, which will then be copied exactly onto a brushed aluminum panel up to 9 square feet in size.

 
RM-8 Output Relay Module  

 

Eight channel relay module plugs into the ULTRA instead of Communicator PGC-8M. Output relay contacts, can be programmed to trigger on system events. 

 

  RDS-1 Remote Terminal             Used to arm and disarm the system.
PC-UL1 Programming Cartridge  

 

Using the PC-UL1 Programming Cartridge the ULTRA-1000 features English menu driven programming capability. This cartridge enables the system to be easily configured for sophisticated and diverse applications. For maximum programming speed and convenience an ASCII computer terminal or personal computer can be substituted for the serial hard copy printer. 

 

 

DP-8340 Printer

Forty column serial dot matrix paper printer which allows data logging of all pertinent  system activity.   ULTRA-1000 detects paper end condition and unauthorized removal of the printer.

 
JU-6 Wiring Junction  

 

Up to six RT-100 cables can be inserted into the JU-6. A cable to the ULTRA-1000 is used to connect all RT-100’s.

 
JC-100 Connector and Leads  


10 position connector with flying leads that mates with receptacles on the JU-6 junction unit and RT-100 remote terminal to allow connection to the ULTRA's 10 conductor remote bus.

 
PGC-8M Digital Communicator  

The PGC-8M can be reprogrammed an unlimited number of times without opening its sealed case. It is programmed using the RJ31X cable and can be reprogrammed by phone from a remote location.   Three independently programmable telephone numbers can be linked together for a 38 to 57 digit phone number. Each phone number can have it's own account number and format, and can also be backed up by one or both of the other phone numbers.