SALCO MUSEUM SECURITY
SHORT-RANGE WIRELESS TRANSMITTERS
SST Transmitter
|
Transmits real time sensor status, low battery, and polling to the receiver up to 500 feet away. Normally open or normally closed circuit dry contacts can be employed to trigger the transmitter. It has 256 system identification codes and is powered by a standard alkaline nine volt battery. Use with sensors such as proximity, shock, glass-break, temperature, limit switches, smoke, and other type sensors with dry output contacts.
|
| SST-1P Hand-held Push-button Transmitter | |
|
|
The model SST-1P is a supervised-wireless transmitter which can transmit a signal to any SALCO Receiver Processor by manually depressing a button sending signals up to distances of five hundred feet. Some applications include personal emergency situations in schools, museums, courtrooms, parking lots, cash register sites. The transmitter is powered by a standard alkaline nine volt battery and transmits low battery and polling signals. Physical dimensions are 3.6" x 5.75" x 1.3" (91.4mm x 146mm x 33mm).
|
| VSP-800 Voice Transmitter | |
|
|
Dispatch roving guards with your pre-recorded message transmitted to standard VHF or UHF two-way radios up to five miles away and more with accessories, or to a Salco pager receiver PR-3MV. System monitors eight hardwired sensors which activate your radio voice message upon a detected event. You can program your own unique voice messages in seconds by speaking into the microphone in any language. VSP-800 Systems are available in multiples of 8 zones up to 64 zones. Any sensor with an output relay contact, or equivalent, can be employed as an input to activate the system. |
