Salco ANTENNAS

SALCO long-range antennas are employed in some applications to increase the functional range of transmitters, receivers, and digital repeaters. The antennas come in two physical configurations, vertical whip type and a multi-element array. The vertical whip antennas are usually mounted directly on the transmitters and receivers. However, they can easily be placed at remote locations via standard coaxial cable. The multi-element arrays are mounted at a location remote from the transmitter or receiver via standard coaxial cable and they increase the functional range much more than the vertical whip antenna.
   

102 Whip Antenna

The model 102 is a high performance omni-directional whip antenna which mounts directly on transmitters and receivers via a 50 ohm BNC type connector. Placement of the antenna at a remote location from the transmitter or receiver is possible via 50 ohm coaxial cable. Physical length of the antenna is approximately 5.25" (13.34cm).
 

 

   OA-3 High-Gain Omni-Directional Antenna

Model OA-3 is an omni-directional whip antenna with 4.6 DB of gain for increasing functional range. The antenna is made with aluminum tubing and stainless steel hardware which provides years of trouble free service.   Physical length of the antenna varies with the specific frequency of operation.

 
  YAGI-6 Directional Antenna

YAGI-6 Directional Antenna has a gain of 10.2 DB to increase the functional range in more demanding applications. The elements are made of solid aluminum rods with stainless steel hardware for years of trouble free service.

 
   YAGI-12 Directional Antenna

The YAGI-12 Directional Antenna has a gain of 12.25 DB to increase the functional range more than the YAGI-6. It has the same physical construction as the YAGI-6 but has a boom length of 72" (182.9cm) and the broadest element is approximately 13.5" (34.29cm).