Salco 700 SERIES SYSTEM ACCESSORIES        

 

702 Deluxe Remote Terminal
Flush mounted remote annunciator with eight zone LED's and bypass pushbutton switches, a memory mode LED, POWER ON LED, and entry alert piezo device.   Any zone can be bypassed by depressing the non-locking pushbutton on the 702. When bypassed the zone’s LED flashes to show that the zone is out of the system.   Up to three 702 remotes can be connected in parallel. 

 

 

703 Eight Zone Annunciator System
Eight zone audible and visual system with LED annunciation, bypassing capability, and reset capability 701 Processor  and 702 Deluxe Remote mounted in 719 keylocked metal enclosure.

 
 

705 Resistor End-of-Line
 

    

Converts protective loops of the 701 Processor Board to 1000 ohm resistor end-of-line loops. Plugs into 701 Processor Board.
707 Voltage Output per Zone
 		   Output Voltage can follow Loop Violation and Restoral. Output Voltage can latch. Voltage Output per Zone only when Control Instrument is ARMED. 24 Hour Trigger on any zone

  708 Contact Output per Zone Module
All the features of the model 707 with contact output per Zone. SPDT 2 amp 24 volt DC relay contacts per zone. Plugs into 701 Processor. 

 
 

709 Resistor End-of-Line Fault Annunciator
 

  

EOL fault indicator LED's illuminate when there is a fault on a protective loop. A loop violation is defined by a closed sensor contact. Violations are displayed on the 770-LT panel and faults on the EOL fault indicator panel. 
716 Retriggerable Audible Control  

Enables the audible to latch on a loop violation and on restoral. For both a loop violation or a loop restoral, the audible will sound until the reset switch is depressed momentarily. Ideal for guard stations. 

 
714 and 715 Cable   Flat ribbon cables 6" and 18” in length used to connect the 701 processor board to any one of the 700 Series optional plug-in boards.

 
METAL ENCLOSURES   718, 719, 720, 722.  Multi-purpose locking and vented cabinets with hinged doors.   

 

  PS-2C Power Supply  

The PS-2C is an uninterruptible power supply which includes a Class 2 Power Transformer which inserts into an 120 Volt 60 Hz electric utility receptacle, and a 7 Ampere-Hour Rechargeable Lead-Acid Battery. During a loss of AC power, the battery can supply a maximum of 4 amps surge on demand. Battery backup time is a function of the amount of current drawn.