Salco 701 PROCESSOR BOARD

     

Eight Zone Annunciator Expander with remote bypass capability. 

Can be added to most existing alarm control instrument panels. 

Determine immediately, by visual inspection, which protective zone has or has had an offense.  Causes of false alarms due to swingers (intermittently faulty loop) can easily be isolated with built-in memory.

 
Built-in Output Relay Pulse  Stretcher Eliminate the added cost of expensive pulse stretchers per zone.
Remote Bypass

 

 Any zone can be bypassed, or unbypassed, from the system by depressing it’s LED.
Output Relay Contacts Common to all Zones

 

 Relay contact outputs (SPDT), common to all zones. Supervised so if power to the processor fails the normally closed contacts open. 
Output Relay Contact  "Always Follow the Loop" per Zone Option

 

 Factory programmed so the output relay contacts always follow the loop activity. 
Momentary Output Relay Contacts

 

 Programmed to provide a momentary output relay change of state for each zone violation.
Latching Common Output Relay Contacts Option on Zone Violations

 

 Programmable for all zones latching. Once a zone latches output relay can only be manually reset with pushbutton reset when a zone is restored.
Audible Piezo Driver Outputs

 

 Can drive three sound piezo audibles. 
Remote Bypassing

 

 Manual Pushbutton switch per zone. Keylock bypass interlock available on 770 remote.
Eight Protective Loops

 

 Use on closed or open circuit loops. Built-in pulse stretcher per zone.
Memory

 

 Automatically goes into memory mode when processor is armed and remains in the memory mode when disarmed. 
LED Driver Outputs Drive a maximum of three eight zone LED remote stations.