Selection Guide for Salco Monitor / Annunciator Systems
Featuring Common Sensor Alarm Reset
and Independent Arm / Disarm (Bypass) per Sensor

   
Up to 64 sensors monitored and real-time status displayed in multiples of 8.

Individual sensor bypass (arm / disarm) function.

Combination sensor status LED lamp / bypass pushbutton switch.

LED sensor lamp illuminates on violation until manually reset.

After manual reset LED sensor lamp displays the real-time status of the sensor.

Keyswitch enables bypass (arm / disarm) function.

Uninterruptible power supply.

Processor is surface mounted and the display / control is flush mounted.

 Optional output relay per sensor monitored in multiples of 8.

Optional end-of-line resistor module in multiples of 8.
 		Self-contained system for monitoring up to 8 sensors.

Up to 8 sensors monitored and real-time sensor status displayed.

LED sensor lamp illuminates on a violation until manually reset.

After manual reset LED sensor lamp displays the real-time status of the sensor.

Individual sensor bypass (arm / disarm) function.

Keyswitch enables bypass (arm/disarm) function.

Uninterruptible power supply.

Optional output relay per sensor.

Optional end-of-line resistor module for up to 8 sensors.

Processor is surface mounted.

Up to 60 sensors monitored in multiples of 6.

LED sensor lamp illuminates flashing and the piezo audible sounds on an alarm until manually reset.

After reset the LED sensor lamp displays the real-time status of the sensor.

Six zone modules mounted in a standard 19” subrack.

Desktop model available.        

Remote LED lamp display / control flush mounted.

Graphic displays available.

 

 

 

 

Common Features:

One LED lamp per sensor.

Common manual acknowledge alarm reset for all sensors monitored.

Common output relay for all sensors monitored.

Piezo audible.